Home > BEHRINGER > CMD- How Do I Set Up My Studio 4A With Deckadance?

CMD- How Do I Set Up My Studio 4A With Deckadance?

Table of contents
 

 

 

 

 

 

 

 

 

What settings need to be made within Deckadance for using with the CMD Studio4A controller?

 

Once the correct driver has been downloaded from our website and correctly installed (no driver is needed when using Mac):

With the CMD Studio4A connected to your computer via USB start Deckadance.

Go to the Preferences menu and Remote MIDI Control tab.
decka1.PNG

In the Auto Detect Controller window click "Press to scan for connected controllers".
decka2.PNG

A prompt now appears on screen "Behringer CMD Studio4A controller found do you want to use it?".
Click OK.
decka3.PNG

In the MIDI Inputs/Outputs window you will see "CMD Studio4a" click the "ON" button.

User-added image

Now go to the Audio Setup tab.
decka6.PNG

In the Audio Device Type window select "ASIO" from the drop down list.

In the Device window select "CMD Studio4A ASIO" from the drop down list.

In the Output Routing window select "Internal Mixing".

In the Monitor L window select "Studio4a-3" and in the R window select "Studio4a-4".

In the Master L window select "Studio4a-1" and in the R window select "Studio4a-2".

decka7.PNG

Your controller is now setup to produce MASTER signal at L&R OUTPUTS 1 (on the rear of the console) and PHONES cue signal for both decks.

 

 

You must to post a comment.
Last modified
22:36, 28 Apr 2016

Tags

Classifications

This page has no classifications.