Home > BEHRINGER > Recording- Why Does My UCA222 Record The Same Signal On Both Sides Of The Stereo Channel?

Recording- Why Does My UCA222 Record The Same Signal On Both Sides Of The Stereo Channel?

Table of contents

UCA222_P0A31_Front_XL.jpgNewKBlogoPNG.png

 

Your UCA222 may have been 'seen' by your computer as a microphone so will be set by windows to record in mono. If your DAW is set to record in stereo then both channels will have the same audio. You will need set windows to record the device in stereo, to do this:

 

- Right click on the Speaker icon and select 'Recording Devices'.

 

- Right click on USB Audio Codec and select 'Properties'.

 

- Go to the 'Advanced' tab.

 

- Select  '2 channel, 16 bit, 44100 Hz' 

 

Your UCA222 will now record in true stereo.

 

You must to post a comment.
Last modified
22:07, 22 Jul 2015

Tags

Classifications

This page has no classifications.