Home > BEHRINGER > UMC- Why Isn't My Interface Recocnised Through USB? (Firmware Upgrade)

UMC- Why Isn't My Interface Recocnised Through USB? (Firmware Upgrade)

Table of contents
 

 

 

 

 

 

 

 

 

 

This Firmware Upgrade Guide is only for the

- UMC204

- UMC404

 

 

It may be the case you have a USB 3.0 chipset and usb port. For USB 3.0 chipsets the firmware needs to be updated on the UMC device. To do this you will need to use a Windows computer with a USB2.0 chipset and USB2.0 ports. The driver will have to also be installed on the computer performing the firmware update. Here is the Firmware setup file link:

http://www.behringerdownload.de/UMC/BEHRINGER_UMC_Firmware_v1_12.zip

 

Here is the Driver setup file: http://www.behringerdownload.de/UMC/BEHRINGER_UMC_Driver_v2_23_0.zip

 

Please note this does not apply to the UMC 'HD' devices (UMC202HD, UMC204HD, UMC404HD) as these already have been configured to work with USB 3.0. 

 

You must to post a comment.
Last modified
22:55, 12 Feb 2017

Tags

Classifications

This page has no classifications.