Home > BEHRINGER > XENYX- Why Is My USB Mixer Not Recording In Stereo On PC?

XENYX- Why Is My USB Mixer Not Recording In Stereo On PC?

Table of contents
 

 

 

 

 

 

 

 

 

It could be the case that your Windows Audio Pan settings are not set correctly and only either the Left channel is recording, the Right channel or an un-balanced signal of both.

 

To correct this go to your Windows Audio Preferences either via the Control Panel Window or by right clicking the Speaker icon in the bottom right hand side of the task bar (as seen in the image below), then select 'Recording devices'.

 

 taskbar3.jpg

 

From the 'Sound' window that pops up select the Behringer WDM driver and click the 'Properties' button.  A window named 'Line In Properties' will show, click the 'Balance' button. A 'Balance' box pops up where you can then change the settings for Line Inputs 1 and 2 (i.e 'Left' side and 'Right' side respectively). If you want both the Left and Right channels to come through the Line Input simply push the faders to full at 100. If you want only the left channel to record simply lower the Right side (2) to 0 (and vice versa if you want only the Right channel to record). See the image below for an illustration:

 

Xenyx Pan levels 01.jpg

You must to post a comment.
Last modified
00:17, 29 Apr 2016

Tags

Classifications

This page has no classifications.